C-Bus Dimmer DIN Rail Mounted Universal, 240V AC, 4 Channel, 2.5A, Without C-Bus Power Supply

C-Bus Dimmer DIN Rail Mounted Universal, 240V AC, 4 Channel, 2.5A, Without C-Bus Power Supply

Item Number: L5504D2UP

Datasheet

Product Dimensions

Width icon

Width216 mm

Height icon

Height92 mm

Depth icon

Depth63 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range

C-Bus

Product brand

Clipsal

Product or component type

dimmer

Device application

control

Physical

Device presentation

basic element

Load type

incandescent|halogen lamp|low voltage lamp with electronic transformer|low voltage lamp with iron-core transformer|LED lamp

Dimmer type

leading edge|trailing edge

Communication network type

C-Bus

Local signalling

LED

Number of channels

4

Connector type

RJ45 for C-Bus|RJ45 for remote override

Mounting support

DIN rail

Clamping connection capacity

1 x 2.5 mm²|2 x 1.5 mm²

Width

216 mm

Height

92 mm

Depth

63 mm

Net weight

717 g

Ambient air temperature for operation

0...45 °C

Relative humidity

10...95 %

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant

Toxic heavy metal free

Yes

Mercury free

Yes

Rohs exemption information

Yes

China rohs regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental disclosure

ENVPEP111268EN

Circularity profile

ENVEOLI111254EN

Others

Commercial status history

SESA301466 | Sun Feb 04 09:18:00 EST 2024 | From Import Local | From 18 to 18

Package 1 bare product quantity

1

Load current

2.5 A per channel

Standby consumption

12 W

Network frequency

47...53 Hz

Maximum number of supported devices

100 per network

Input impedance

100 kOhm at 1-1 kHz

Isolation voltage

3.75 kV from C-Bus to mains

Starting time

5 s

Software function

select network clock|select network burden|select time delay range

Number of modules

12

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

10 cm

Package 1 width

10.5 cm

Package 1 length

22.5 cm

Package 1 weight

835 g

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Take-back

No

Product contributes to saved and avoided emissions

No

Removable battery

N/A
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Environmental Disclosure

  • End of Life Manual

  • Installation Instruction

  • Operating Manuals

  • Specification Guide

  • Application Notes

  • Declaration of Conformity

  • Software - Release

Frequently Asked Questions

hide show

Why is there still 240V on the C-Bus dimmer output when it has been switched off from C-Bus?

C-Bus dimmer is controlled by Triac/Mosffet and due to this has a small leakage current.

This small leakage current will impose main voltage out on the dimmer output/load even those the channel is switched off via C-Bus.

We advise that the whole dimmer needs to be switched off before maintenance takes place.



 

What type of LED's can be used on C-Bus Dimmers?

Firstly you will need to confirm whether your C-Bus system contains C-Bus Leading Edge Dimmers or C-Bus Universal Dimmers, You may need to consult with your EcoXpert in Light and Room Control which one(s) you have if unsure. 

The general recommendations for LED compatibility with C-Bus Dimmers is as follows
1) Ensure your LED's have a dedicated LED Driver (electronic transformer) that supports your C-Bus Dimmer type
2) Bench test that the LED Driver is of good quality and works as expected at your site
3) C-Bus Dimmer channels require >25W of load if less is connected to a specific channel that channel will require the addition of a 31LCDA (Load Corrective Device)
image.png
4) If the dimming range of the LED fittings is specified by the manufacturer - the installer can programmer the Min/Max settings of the C-Bus Dimming channel to match the LED fittings dimming range.

Note:
C-Bus Leading Edge Dimmers will require LED's which have electronic transformers (LED Driver) which support Leading Edge AC phase control dimming (as noted in the compatible loads section of the installation manual)
image.png

C-Bus Universal Dimmers will require LED's which have electronic transformers (LED Driver) which supports Trailing Edge AC phase control dimming (as noted in the compatible loads section of the installation manual).
Although Universal Dimmers can support leading OR trailing edge AC phase control dimming it needs to be exclusively one or the other (NOT BOTH). As such LED Drivers which note LE/TE LED Driver are NOT suitable for the Universal Dimmer. 
image.png
IMPORTANT: Clipsal by Schneider Electric & Schneider Electric DO NOT make LED's which are compatible with C-Bus NOR can we recommend specific LED Drivers for your C-Bus Dimmer type as LED Dimming and Driver technology is continually changing. The above is a guideline to assist you choose a compatible LED with dedicated LED Driver that supports your dimmer in question. As noted above please have your EcoXpert in Light and Room Control bench test LED Fittings and LED Driver for suitability on your C-Bus Network.