Specifications
Design
| Range | Resi9 |
|---|---|
| Product or component type | surge arrester |
| Device application | distribution |
Physical
| [ue] rated operational voltage | 230 V +/- 6 % AC 50/60 Hz |
|---|---|
| Local signalling | white/red flag |
| Mounting mode | clip-on |
| Mounting support | DIN rail |
| Height | 85 mm |
| Width | 18 mm |
| Depth | 64 mm |
| Net weight | 119 g |
| Connections - terminals |
|
| Wire stripping length | 14 mm |
| Standards |
|
| Ip degree of protection | IP20 |
| Ik degree of protection | IK03 conforming to IEC 62262 |
| Relative humidity | 5...95 % at 55 °C |
| Ambient air temperature for operation | -25...70 °C |
| Ambient air temperature for storage | -40...85 °C |
| Mercury free | Yes |
| Rohs exemption information | Yes |
| Reach regulation | Reference contains Substances of Very High Concern above the threshold |
| China rohs regulation | Product out of China RoHS scope |
| Eu rohs directive | Compliant By Exemption |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Documents & downloads
Filter items
-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
Installation Instruction
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
Frequently Asked Questions
Does the Resi9 SPD require an additional protection device (MCB)?
Hide Show
We recommend using Resi9 MCB backup protection device for Resi9 SPD, 1P 40A MCB (R9F06140) for 1P SPD (R9L40100).
Why a back up protection is necessary?
(1) Protect upstream fuse/breaker - cascading
(2) Ensure the power can be turned back on until the SPD is replaced in the event of SPD trip
Why a back up protection is necessary?
(1) Protect upstream fuse/breaker - cascading
(2) Ensure the power can be turned back on until the SPD is replaced in the event of SPD trip
When does the Resi9 SPD need to be replaced?
Hide Show
The Resi9 surge protection device (SPD) comes with an end of life indication flag on the front face.
When the flag is white, the product will continue to help protect the installation against surges.
However when the flag turns red, the SPD cartridge needs to be replaced to continue to protect the installation against surge currents.
When the flag is white, the product will continue to help protect the installation against surges.
How do I replace the Resi9 SPD cartridge?
Hide Show
Instructions to replace the Resi9 SPD cartridge (R9L40102) are clearly illustrated in the attached Resi9 SPD instruction sheet.
Does the Resi9 SPD cartridge need to replaced only by a licensed electrician?
Hide Show
Yes, it is recommended to go through licensed electrician for the replacement of Resi9 SPD.
